DES-1005P 5-Port 10/100Mbps with 1-Port PoE Unmanaged Switch Manual RECYCLABLE V1.
TABLE OF CONTENTS About This Guide ................................................................................. 1 Purpose............................................................................................. 1 Introduction .......................................................................................... 2 Fast Ethernet Technology ................................................................ 2 Switching Technology .....................................................................
ABOUT THIS GUIDE Congratulations on your purchase of the D-Link DES-1005P. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Port-1 on the switch supports Power over Ethernet (PoE), meaning it will automatically detect the presence of an IEEE 802.3af-compliant powered device (PD) and provide power through the port. The switch provides up to 15.
INTRODUCTION Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-TX (Fast Ethernet) provides a non-disruptive, smooth evolution from the current 10BASE-T technology. 100Mbps Fast Ethernet is a standard specified by the IEEE 802.
Switching Technology Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area network into different segments, which don’t compete with each other for network transmission capacity. The switch acts as a high-speed selective bridge between the individual segments.
Power over Ethernet (PoE) Power over Ethernet (PoE) integrates power and data onto one single cabling infrastructure, eliminating the need to have AC power available at all locations. Power and Data is integrated onto the same cable, supporting category 5/5e up to 100 Meters. PoE will provide power to PoE compatible devices, such as IP telephones, wireless LAN access points and IP security cameras.
UNPACKING AND INSTALLATION Unpacking Open the box and carefully unpack it. The box should contain the following items: One DES-1005P One External Power Adapter Wall Mount Kit Four rubber feet Quick Installation Guide If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the DES-1005P can be performed using the following steps: The power outlet should be within 1.82 meters (6 feet) of the Switch.
Connecting Network Cable The Switch support 5 10/100Mbps Ethernet ports and Port 1 PoE Enabled port, the PoE port will automatically activate when a compatible terminal is identified. The Switch will supply power through the Ethernet port to the connected PoE powered device (PD). For legacy devices that are not compatible, the PoE port will not offer power to this device. This feature allows users to freely and safely mix legacy and Power over LAN compatible devices on their network.
IDENTIFYING EXTERNAL COMPONENTS Front Panel The figure below shows the front panels of the DES-1005P. Figure 1. Front panel Power LED Indicator: This green indicator light is on when the DES-1005P is receiving power; otherwise, it is off. Ethernet Ports (Port 1~5): These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex transfer modes.
Rear Panel The figure below shows the front panels of the DES-1005P. Figure 2.
UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and helps monitor and troubleshoot when needed. Figure 3. LED indicators of the Switch System LED LED Indicators LED Indicative Power (per device) Link/Act (per port) Color Status Description Green Solid Light Off Light Solid light Power on Power off When there is a secure connection (or link) to device at any of the ports. When there is reception or transmission occurring at any of the ports.
PoE Rule 1. 2. 3. 4. 5. 6. Supplies power to PD device, meeting IEEE802.3af standards. It is able to provide power to PD devices more sufficiently. Auto discovery feature, automatically recognize the connection of PD device and immediately sends power to it Active circuit protection, automatically disables the port if there is a short while other ports remain active Auto disable port via two different methods as below: a. Over Current Protection - 802.
MOUNTING THE SWITCH ON A WALL The DES-1005P can also be mounted on a wall. Two mounting slots are provided on the bottom of the switch for this purpose. Please make sure that the front panel is exposed in order to view the LEDs. Please refer to the illustration below: A.) Mounting on a cement wall 1. Mount the Nylon screw anchors into a cement wall. 2. Drive the T3 x 15L screws into the Nylon screw anchors. 3. Hook the mounting holes of the switch back on the screws; you have completed the wall-mount. B.
TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3af Power over Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full-duplex) Topology Star Network Cables 10BASET: 2-pair UTP Cat. 3, 4, 5; up to 100m 100BASE-TX: 2-pair UTP Cat.
Performance RAM Buffer: 64K bytes per device Filtering Address Table: 1K entries per device Packet Filtering/Forwarding Rate: 10Mbps Ethernet: 14,880/pps MAC Address Learning: Automatic update Transmits Method: Store-and-forward 100Mbps Fast Ethernet: 148,800/pps 13
