Datasheet

Specications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2013 D-Link Corporation. All rights reserved. E&OE.
SFP+ Direct Attach Cable Series
10G Passive SFP+ Twinaxial Direct Attach Cable
Technical Specications
General
Device Rate • 10 Gbps Gigabit Ethernet
Connector Type • SFP+ Cable Assembly
Wire AWG • DEM-CB100S, DEM-CB300S: 30 AWG • DEM-CB500S, DEM-CB700S: 24 AWG
VMA Loss to Crosstalk Ratio (VCR) • Min.: 32.5 dB
Physical
Minimum Cable Bend Radius • 23.5 mm (0.93 inches)
Cable Characteristic Impedance • 100 Ohms
Voltage • 30 V AC
Current • 0.5 A
Temperature • Operating: -40 to 85 °C (-40 to 185 °F)
Certifications • SFP MSA (Multi-Source Agreement)
• SFF-8431
• EIA 364
• UL 94
Order Information
Model Number Description
DEM-CB100S 1 meter 10G 30AWG Passive SFP+ to SFP+ Direct Attach Cable
DEM-CB300S 3 meter 10G 30AWG Passive SFP+ to SFP+ Direct Attach Cable
DEM-CB500S 5 meter 10G 24AWG Passive SFP+ to SFP+ Direct Attach Cable
DEM-CB700S 7 meter 10G 24AWG Passive SFP+ to SFP+ Direct Attach Cable
1
It is recommended that you only use the 10G Passive SFP+ Twinaxial Direct Attach Cable with D-Link products.
Updated 2013/01/14