User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
83
Figure 4- 53. 802.1x Capability Settings and Table window
To set up the Switch’s 802.1x port-based authentication, select which ports are to be configured in the From and
To fields. Next, enable the ports by selecting Authenticator from the drop-down menu under Capability. Click
Apply to let your change take effect.
Configure the following 802.1x capability settings:
Parameter Description
Unit
Allows you to select a switch from a switch stack using that switch’s Unit ID.
From and To Ports being configured for 802.1x settings.