User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
81
Figure 4- 51. 802.1x Authenticator Settings modify window
This window allows you to set the following features:
Parameter Description
Unit
Allows you to select a switch from a switch stack using that switch’s Unit ID.
From [ ] To [ ]
Enter the port or ports to be set.
AdmDir
From the pull-down menu, select whether a controlled Port that is
unauthorized will exert control over communication in both (both) receiving
and transmitting directions, or just the receiving direction (in). The default is
both.
Port Control
Displays the administrative control over the port’s authorization status.
forceAuthorized forces the Authenticator of the port to become Authorized.
forceUnauthorized forces the port to become Unauthorized. Auto means the
port state reflects the outcome of the authentication exchange between
supplicant, authenticator, and authentication. The default is forceAuthorized.
TxPeriod
Select the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets. The default is 30 seconds.
Quiet Period
Select the time interval between authentication failure and the start of a new
authentication attempt. The default is 60 seconds.
SuppTimeout
Select the time to wait for a response from a supplicant (user) for all EAP
packets, except for the Request/Identity packets. The default is 30 seconds
Server Timeout
Select the length of time to wait for a response from a RADIUS server. The
default is 30 seconds.