User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
75
Destination IP
Destination IP Address- Enter an IP Address mask for the destination IP
address.
Dscp(0-63)
This field allows the user to enter a Dscp value in the space provided,
which will instruct the Switch to examine the DiffServ Code part of each
packet header and use this as the, or part of the criterion for forwarding.
The user may choose a value between 0 and 63.
Protocol
This field allows the user to modify the protocol used to configure the
Access Rule Table, depending on which protocol the user has chosen in
the Access Profile Table. In the example above IGMP is the protocol
chosen and therefore the user may modify the IGMP settings for this
access profile.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the
following screen:
Figure 4- 43. Access Rule Display window (IP)
To configure the Access Rule for Ethernet, open the Access Profile Table (figure 4-36) and click Modify for an
Ethernet entry. This will open the following screen:
Figure 4- 44. Access Rule Table