User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
68
Click Apply to implement your changes.
Time Zone and DST
The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following
screen.
Figure 4- 37. Time Zone and DST Settings Page
The following parameters can set:
Parameter Description
Daylight Saving
Time State
Use this pull-down menu to Enable or Disable the DST Settings.
Daylight Saving
Time Offset in
Minutes
Use this pull-down menu to specify the amount of time that will
constitute your local DST offset − 30, 60, 90, or 120 minutes.
Time Zone Offset
from GMT in +/-
HH:MM
Use these pull-down menus to specify your local time zone’s offset
from Greenwich Mean Time (GMT.)