User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
66
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
UDP Port (514 or
6000-65535)
Type the UDP port number used for sending Syslog messages. The
default is 514.
Status
Choose Enabled or Disabled to activate or deactivate.
To set the System Log Server configuration, click Apply. To delete an entry from the System Log Server
window, click the corresponding
under the Delete heading of the entry you wish to delete. To return to the
Current System Log Servers window, click the Show All System Log Servers link.
Configuring SNTP Settings
The Simple Network Time Protocol (SNTP) {an adaptation of the Network Time Protocol (NPT)} is
configured on the switch using the following pages.
Time Settings
To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on
the Time Setting link, revealing the following screen for the user to configure.