User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
53
Advertisement
Enabling this function will allow the switch to send out GVRP packets to
outside sources, notifying that they may join the existing VLAN.
Port
Allows an individual port to be specified as member of a VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking
the box will designate the port as Tagged.
None
Allows an individual port to be specified as a non-VLAN member.
Egress
Select this to specify the port as a static member of the VLAN. Egress
member ports are ports that will be transmitting traffic for the VLAN. These
ports can be either tagged or untagged.
Forbidden
Select this to specify the port as not being a member of the VLAN and that
the port is forbidden from becoming a member of the VLAN dynamically.
GVRP Settings
In the Configuration menu, open the VLANs folder and click GVRP Setting.
The GVRP Settings dialog box, shown below, allows you to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled switches. In
addition, Ingress Checking can be used to limit traffic by filtering incoming packets whose PVID does not
match the PVID of the port. Results can be seen in the table under the configuration settings, as seen below.