User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
52
Figure 4- 22. 802.1Q Static VLANs – Add
To return to the Current 802.1Q Static VLANs Entries window, click the Show All Static VLAN Entries
link.
To change an existing 802.1Q VLAN entry, double-click on the selected entry in the Current 802.1Q Static
VLANs Entries menu. A new menu appears, use this to configure the port settings and to assign a unique name
and number to the new VLAN. See the table below for a description of the parameters in the new menu.
Figure 4- 23. 802.1Q Static VLANs Entry Settings – Modify
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs menus:
Parameter Description
Unit
Displays the Unit ID of the switch − within the switch stack − that the VLAN
will be created on.
VID (VLAN ID) Allows the entry of a VLAN ID in the Add dialog box, or displays the VLAN
ID of an existing VLAN in the Edit dialog box. VLANs can be identified by
either the VID or the VLAN name.
VLAN Name
Allows the entry of a name for the new VLAN in the Add dialog box, or for
editing the VLAN name in the Edit dialog box.