User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
24
Restart System
The following menu is used to restart the Switch. Access this menu by clicking on the Reboot Device link in the
Maintenance folder.
Click the Yes after Do you want to save the settings? to instruct the Switch to save the current configuration to
non-volatile RAM before restarting the Switch.
Clicking the No option instructs the Switch not to save the current configuration before restarting the Switch.
All of the configuration information entered since the last time Save Changes was executed will be lost.
Click the Restart button to restart the Switch.
Figure 3- 12. Restart System
NOTE: Clicking Yes is equivalent to executing Save Changes and then
restarting the Switch.
Switch Information
The first page displayed upon logging in presents the System Information menu. This page can be accessed at
any time by clicking the Switch Information link in the Configuration folder.