User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
22
Figure 3- 9. Modify User Accounts
Modify or delete an existing user account in the User Account Modify Table. To delete the user account, click
on the Delete button. To change the password, type in the New Password and retype it in the Confirm New
Password entry field. Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
To delete a user account using CLI use the command delete account. To change an existing account use config
account.
Admin and User Privileges
There are two levels of user privileges: Admin and User. Some menu selections available to users with Admin
privileges may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management Admin User
Configuration
Yes Read Only
Network Monitoring
Yes Read Only
Community Strings and Trap Stations
Yes Read Only
Update Firmware and Configuration Files
Yes No
System Utilities
Yes Ping Only
Factory Reset
Yes No
User Account Management
Add/Update/Delete User Accounts
Yes No
View User Accounts
Yes No
Admin and User Privileges
After establishing a User Account with Admin-level privileges, be sure to save the changes (see below).
Saving Changes
Changes made to the Switch’s configuration must be saved in order to retain them. Access the Save
Configuration by clicking the Save Changes button located in the Maintenance folder.