User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
21
Security IP Management Stations Configuration
Go to the Security Management folder and click on Security IP; the following screen will appear.
Figure 3- 6. Security IP Management Setup
Use the Management Station IP Settings to select up to three management stations used to manage the Switch.
If you choose to define one or more designated management stations, only the chosen stations, as defined by IP
address, will be allowed management privilege through the web manager or Telnet session. To define a
management station IP setting, type in the IP address and click on the Apply button.
User Accounts Management
Use the User Accounts Management window to control user privileges. To view existing User Accounts, open
the Security Management folder and click on the User Accounts link. This will open the User Account
Management page, as shown below.
Figure 3- 7. User Accounts Management Table
To add a new user, click on the Add button. To modify or delete an existing user, click on the Modify button for
that user.
Figure 3- 8. Add User Accounts Modify Table
Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm
New Password. Choose the level of privilege (Admin or User) from the Access Right drop-down menu. To add
a user account using the CLI commands use create account and config account.