User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
158
IGMP Snooping Table
IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address
from IGMP packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in
the Reports field.
To view the IGMP Snooping table, click IGMP Snooping Group on the Monitoring menu:
Figure 6- 18. IGMP Snooping Table
The following field can be viewed:
Parameter Description
VLAN ID
The VLAN ID (VID) of the multicast group.
Multicast Group
The IP address of the multicast group.
MAC Address
The MAC address of the multicast group.
Queries
A read only field showing the status of the Querier State. Disabled implies
that the Switch is not transmitting IGMP Snooping Query packets, while
Enabled means those packets are being transmitted.
Reports
The total number of reports received for this group.
Note: To configure IGMP snooping for the DGS-3324SR, go to the
Configuration folder and select IGMP. Configuration and other
information concerning IGMP snooping may be found in Section 4 of this
manual under Configuring IGMP.