User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
135
Figure 5- 8. SNMP Group Table Configuration
The following parameters can set:
Parameter Description
Group Name
Type an alphanumeric string of up to 32 characters. This is used to
identify the new SNMP group of SNMP users.
Read View Name
This name is used to specify the SNMP group created can request SNMP
messages.
Write View Name
Specify a SNMP group name for users that are allowed SNMP write
privileges to the Switch’s SNMP agent.
Notify View Name
Specify a SNMP group name for users that can receive SNMP trap
messages generated by the Switch’s SNMP agent.
Security Model
SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPv2 – Specifies that SNMP version 2c will be used. The SNMPv2
supports both centralized and distributed network management strategies.
It includes improvements in the Structure of Management Information
(SMI) and adds some security features.
SNMPv3 – Specifies that the SNMP version 3 will be used. SNMPv3
provides secure access to devices through a combination of authentication
and encrypting packets over the network.
Security Level
The Security Level settings only apply to SNMPv3.
NoAuthNoPriv − Specifies that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
AuthNoPriv − Specifies that authorization will be required, but there will be
no encryption of packets sent between the Switch and a remote SNMP
manager.
AuthPriv − Specifies that authorization will be required, and that packets
sent between the Switch and a remote SNMP manger will be encrypted.
To implement your new settings, click Apply. To return to the SNMP Group Table, click the Show All SNMP
Group Table Entries link.