User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
132
Figure 5- 3. SNMP User Table Configuration
The following parameters can set:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created can request SNMP
messages.
SNMP Version
V1 – Specifies that SNMP version 1 will be used.
V2 – Specifies that SNMP version 2 will be used.
V3 – Specifies that SNMP version 3 will be used.
Auth-Protocol
None − Specifies that no authorization protocol is in use.
MD5 − Specifies that the HMAC-MD5-96 authentication level will be used.
SHA − Specifies that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None − Specifies that no authorization protocol is in use.
DES − Specifies that DES 56-bit encryption is in use, based on the CBC-
DES (DES-56) standard.
encrypted
Checking the corresponding box will enable encryption for SNMP V3 and is
only operable in SNMP V3 mode.
To implement the changes, click Apply. To return to the SNMP User Table, click the Show All SNMP User
Table Entries link.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be
accessed by a remote SNMP manager. To view the SNMP View Table, open the SNMP Manager folder and
click the SNMP View Table entry. The following screen should appear: