User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
128
Parameter Description
Interface Name
Allows the entry of the name of the IP interface for which PIM-DM is to be
configured. This must be a previously defined IP interface.
IP Address
Displays the IP address for the IP interface named above.
Hello Interval(1-
18724 sec) <30>
This field allows an entry of between 1 and 18724 seconds and determines
the interval between sending Hello packets to other routers on the network.
The default is 30 seconds.
Join/Prune
Interval(1-18724 sec)
<60>
This field allows an entry of between 1 and 18724 seconds. This interval
also determines the time interval the router uses to automatically remove
prune information from a branch of a multicast delivery tree and begin to
flood multicast messages to all branches of that delivery tree. These two
actions are equivalent. The default is 60 seconds.
State <Disabled>
This field can be toggled between Enabled and Disabled using the pull-
down menu, and is used to enable or disable PIM-DM for the IP interface.
The default is Disabled.
Click Apply to implement the changes on the Switch.