User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
115
Figure 4- 73. Edit OSPF Interface Settings menu
Configure each IP interface individually using the OSPF Interface Settings – Edit menu. Click the Apply button
when you have entered the settings. The new configuration appears listed in the OSPF Interface Settings table.
To return to the OSPF Interface Settings table, click the Show All OSPF Interface Entries
link.
Some OSPF interface settings require previously configured OSPF settings. Read the descriptions below for
OSPF interface setting details.
Parameter Description
Interface Name
Displays the interface name of an IP interface previously configured on the
Switch.
IP Address
The IP address of the Interface Name, and its current status (Link Up or
Link Down).
Network Medium
Type
A read only field describing the type of network medium used. This field will
only read BROADCAST due to OSPF configurations permanently set in the
Switch.
Area ID
Allows the entry of an OSPF Area ID configured above.
Router Priority
Allows the entry of a number between 0 and 255 representing the OSPF
priority of the selected area. If a Router Priority of 0 is selected, the switch
cannot be elected as the Designated Router for the network.