User`s guide

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
87
Radius Server
<10.53.13.94>
Set the RADIUS server IP.
Authentic Port <1812>
Set the RADIUS authentic server(s) UDP port. The default is 1812.
Accounting Port
<1813>
Set the RADIUS account server(s) UDP port. The default is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Status
This allows you to set the RADIUS Server as either Valid or Invalid.
Configuring Layer 3 IP Networking
To access the Layer 3 IP Networking links, open the Configuration folder and then the Layer 3 IP
Networking folder.
L3 Global Advanced Settings
The L3 Global Advanced Settings window allows the user to enable and disable Layer 3 settings and functions
from a single window. The full settings and descriptions for these functions will appear later in this section To
view this window, open the Configuration folder and then the Layer 3 IP Networking folder and click on the
L3 Global Advanced Settings link to access the following window.
Figure 4- 57. L3 Global Advanced Settings
The user may set the following:
Parameter Description
DVMRP State
The user may globally enable or disable the Distance Vector Multicast
Routing Protocol (DVMRP) function by using the pull down menu.
PIM-DM State
The user may globally enable or disable the Protocol Independent
Multicast – Dense Mode (PIM-DM) function by using the pull down menu.
RIP State
The user may globally enable or disable the Routing Information Protocol
(RIP) function by using the pull down menu.
OSPF State
The user may globally enable or disable the Open Shortest Path first
(OSPF) function by using the pull down menu.