User's Manual

29D-Link DCS-5222L/DCS-5211L User Manual
Section 4 - Configuration
The options in Image Setup allow you to adjust the settings for your IP
camera sensor and image.
Brightness: This adjusts the brightness of the camera image. This is set to 50 by default.
Saturation: This adjusts the color saturation. Saturation controls the strength of color in the
image. This is set to 50 by default.
Contrast: This adjusts the contrast of the camera image, making a dull image sharper or a
bright image smoother. This is set to 50 by default.
Hue: The Hue controls the dierent degree of color stimulation in the camera image. This is
set to 50 by default.
Frequency: This option adjusts the camera sensor’s setting to avoid the image ickering under
certain light sources, such as orescent lights. This is set to Auto by default.
White balance: You can change the white balance of the camera image by selecting a setting
from the drop down box. This is set to auto by default.
B/W: Ticking this checkbox will change the camera image into black and white.
Flip: This will ip the image vertically.
Mirror: This will ip the image horizontally in such a way that your left side will be on the left side of the screen and vice versa.
Slow shutter: This can be used to allow manual control of the shutter speed. Select slower shutter speeds when environment is dimly lit, faster
speeds are required when in brighter lighting.
Note: Mirror and Flip can be used if you choose to mount the DCS-5222L/DCS-5211L upside down on the ceiling.
Image Setup