User's Manual

21D-Link DCS-5222L/DCS-5211L User Manual

Section 4 - Conﬁguration

Using the Conﬁguration Menu

After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web conguration utility

is designed to allow you to easily access and congure your DCS-5222L/DCS-5211L. At the end of the wizard, click Go To

Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the User name

admin and the password you created in the Setup Wizard. If you did not create a password, the default password is blank.

After entering your password, click OK.

Note: If you are directly connecting your PC to the camera, or if you or using the camera on a closed network, the

default IP is 192.168.0.20.