User manual

38D-Link DCS-960L User Manual
Section 3 - Conguration
FTP
This section allows you to congure your camera to send snapshots and video clips to an FTP server. You can set the camera to send snapshots and
video clips to dierent FTP servers.
Host Name:
Port:
User Name:
Password:
Path:
Interval:
Passive Mode:
Test FTP Server:
Enter the IP address of the FTP server that you will be connecting to.
Enter the port of the FTP server that you will be connecting to.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save les to on the FTP server.
Enter the amount of time to wait before the camera can send another e-mail.
Enabling passive mode may help you reach your FTP server if your camera is
behind a router protected by a rewall.
Clicking on the Test button will send a test JPEG snapshot to the FTP server
specied above to make sure that your settings are correct.