User manual

33D-Link DCS-960L User Manual
Section 3 - Conguration
Preset
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera’s viewable area by
using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you can create preset
sequences, which will automatically change the camera’s view between the dierent presets according to a dened order and timing you can set.
ePTZ Enable:
ePTZ Speed:
Arrow Buttons
and Home
Button:
Input Preset
Name:
Preset Position:
Preset Sequence:
Check this box to enable ePTZ for your camera.
You may select a value between 1 and 10. 0 is the slowest and 10 is the fastest.
Use these buttons to move to a specic part of the viewing area, which you can
then set as a preset. Click the Home button to return to the center of the viewing
area.
Enter the name of the preset you want to create, then click the Add button to
make a new preset. If an existing preset has been selected from the Preset List,
you can change its name by typing in a new name, then clicking the Rename
button.
Click the drop-down box to see a list of all the presets that have been created.
You can select one, then click the GoTo button to change the displayed camera
view to the preset. Clicking the Remove button will delete the currently selected
preset.
This section allows you to create a preset sequence, which automatically moves
the camera’s view between a set of preset views.