User`s manual

DCS-950 User’s Manual

D-Link Systems, Inc.

Hardware Installation

Connect the Ethernet Cable

Connect the included Ethernet cable to the network cable connector located on the

back panel of the DCS-950 and attach it to the network. Network Connectivity is

confirmed when the green LED Indicator on the DCS-950 located below the Power

LED is illuminated.

Attach the External Power Supply

Attach the external power supply to the DC power input connector located on the rear

panel of the DCS-950 and connect it to your local power supply.

Note:

Power source is

confirmed when the orange LED Power Indicator located to the right of the lens on the

DCS-950 is illuminated.