User manual
37D-Link DCS-942L User Manual
Section 4 - Conguration
Motion Detect
Enabling Video Motion will allow your camera to use the motion
detection feature. You may draw a nite motion area that will be
used for monitoring.
Enable Video
Motion:
Enable PIR:
Sensitivity:
Drawing Mode:
Clear:
Refresh Image:
Select this box to enable the motion detection
feature of your camera.
When this option is selected, use PIR (passive
infrared) to detect motion.
Species the measurable dierence between two
sequential images that would indicate motion.
Please enter a value between 0 and 100.
Select Draw Motion Area to select the area of
the picture to monitor for movement to trigger
recording or snapshot. Use your mouse to click
on the blocks that you would like to monitor for
motion. Select Erase Motion Area to remove the
blocks and stop the camera from monitoring that
area of the picture.
Clears all motion detection areas from the picture.
Updates the image with a new one at the time the
button is pressed.
Click Save Settings to save your changes.