User manual

32D-Link DCS-942L User Manual
Section 4 - Conguration
Audio and Video
Video Prole:
Encode Type:
Resolution:
FPS:
Encode
Method:
bps:
JPEG Quality:
RTSP URL:
Day/Night Mode:
Audio Setup:
This section allows you to congure the audio and video settings
for your camera.
This section allows you to change the Encode Type,
Resolution, FPS, and Quality.
The compression format used when viewing your
camera.
Select the desired video resolution from three formats:
640x480, 320x240, and 160x120. The higher setting
can obtain better quality. However, it will use more
resource within your network.
Select the optimal setting depending on your network
status. Please note that the higher setting can obtain
better quality. However, it will use more resources
within your network.
Select Constant bitrate(CBR) for xed the bandwidth
consumption. Quality will depend on the quality
options(Low, Fair, Standard, Good, Excellent) to adjust
bitrate automatically.
Select the bitrate to assign the video. This is a constant
bitrate. A higher bitrate will result in better looking
video at the expense of a larger le size.
Select one of ve levels of image quality: Highest, High,
Medium, Low, and Lowest.
The URL used to connect to the camera when
viewing from QuickTime or a mobile device.
Allows you to control the IR LEDs on the front of the
camera.
Allows you to enable or disable and adjust the volume
level of the speaker and microphone.
Click Save Settings to save your changes.