User manual
28D-Link DCS-942L User Manual
Section 4 - Conguration
You may congure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be set to a
number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to
1010, you must type http://192.168.0.100:1010 instead of only “http://192.168.0.100”.
The RTSP port is used to establish and control media sessions between two endpoints for the Real Time Streaming Protocol. The default
port is 554.
Enable this setting to congure your camera as a UPnP device in the network.
Checking the Bonjour box will allow the camera to be discoverable on the network and visible to Apple devices.
Port Settings:
UPnP:
Apple:
Click Save Settings to save your changes.