User Manual

23D-Link DCS-936L User Manual
Section 3 - Conguration
Internet Connection Setup Wizard
Note: Use this wizard if you are connecting the camera directly to a public IP address. If you are
connecting the camera to a router, select DHCP Connection (most common) or select Static
IP Address to manually assign the camera its IP settings.
Step 1
The Internet Connection Setup Wizard will guide you through a step-by-step process to congure
your DCS-936L and connect it the Internet. Click Next to continue.
Step 2
Select DHCP Connection (Dynamic Host Conguration Protocol) if you want your DHCP
server (usually enabled on your router) to assign the camera its IP settings.
If you want to manually assign the IP settings, select Static IP Address and enter the
following details:
Enter an IP Address for your camera.
Enter the Subnet Mask of your network.
Enter the Default Gateway address. This is usually the IP
address (LAN) of your router.
Enter the primary DNS server’s IP address. This is usually also
the IP address (LAN) of your router.
Enter the secondary DNS server’s IP address. This is optional.
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary DNS: