Instructions

DCS-932L
4
ENGLISH
WPS SETUP
Alternatively, you may create a WPS connection if your router or access point supports WPS. To create a
WPS connection:
Step 1:
Press and hold the WPS button on the back of the camera for three seconds. The blue WPS status LED
above the button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers, you
may need to log into the web interface and then click an onscreen button to activate the WPS feature. If
you are not sure where the WPS button is on your router or access point, please refer to your router’s user
manual.
The DCS-932L will automatically create a wireless connection to your router. While connecting, the green
LED will fl ash and your camera will reboot.
Insert the Installation CD-ROM into your computer’s CD drive. On the desktop, open your CD drive
and double-click on the SetupWizard fi le.
Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the
installation process from connecting your hardware to confi guring your camera and registering it with
your mydlink account.
SetupWizard
Note: mydlink portal requires Java
TM
to function correctly.
For more guidelines, please refer to mydlink FAQ pages at https://eu.mydlink.com/faq/mydlink
PRODUCT SETUP
MAC USER