DCS-8300LHV2 Full HD Wi-Fi Camera User Manual 08/25/2020 Hardware: A1 Manual Version: 1.
Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revisions Revision Date 1.
Table of Contents Table of Contents Product Overview............................................................... 1 Package Contents.......................................................................... 1 Introduction.................................................................................... 2 System Requirements.................................................................. 2 Hardware Overview...................................................................... 3 Front..................
Section 1 - Product Overview Product Overview Package Contents Full HD Wi-Fi Camera MicroUSB Power Adapter Mounting Hardware Quick Installation Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with your product will cause damage and void the warranty for this product.
Section 1 - Product Overview Introduction No more struggles to find the perfect angle, the DCS-8300LHV2 lets you adjust your camera a full 360-degrees. With vivid Full HD 1080p resolution @ 30 frames per second, you’ll never miss a moment, and what’s more – built-in AI-based Person Detection cleverly identifies human motion, so you only get alerts when it matters most.
Section 1 - Product Overview Hardware Overview Front Light Sensor Status LED IR LEDs Camera Lens Microphone microSD Card Slot 360° Rotating Stand Light Sensor Status LED IR LEDs Camera Lens Microphone microSD Card Slot D-Link DCS-8300LHV2 User Manual The IR-Cut removable sensor monitors lighting conditions and switches between color and infrared accordingly. See LED Behavior on page 5 for more information. IR LEDs illuminate the device's field of view in low-light environments.
Section 1 - Product Overview Back Speaker Reset Button Power Connector Speaker Reset Button Power Connector D-Link DCS-8300LHV2 User Manual Provides audio playback for the two-way audio feature. Hold the recessed button down to reset the camera to factory default settings. Attach your power adapter to this port to supply power to the device.
Section 1 - Product Overview LED Behavior Status LED Connected to the network and mydlink. Booting up. Status LED Ready for set up. Firmware being updated - do not power off.
Section 2 - Installation Installation Safety Please read all of the safety and operating instructions before using device: • • Do not open the device or attempt to repair it. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel to gently wipe it down.
Section 2 - Installation Wireless Installation Considerations The DCS-8300LHV2 Full HD Wi-Fi Camera lets you view video footage from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 2 - Installation mydlink App Camera Setup 1 / Download the mydlink app from the App Store (iOS) or Google Play (Android) by scanning the QR code. Note: Ensure that your device is wirelessly connected to the network that the DCS-8300LHV2 will be in. 2 / Launch the mydlink app and create a new account or sign in to your existing account. Note: If you are asked about allowing the app to access your location or to send notifications, select Allow.
Section 2 - Installation 3 / Power on the device and wait for the Status LED to flash orange. Note: Make sure that your mobile device’s Bluetooth is on. 4 / Place your device next to your mobile device. A prompt will appear tap Add Device, then follow the app instructions.
Section 2 - Installation Device Placement To get the most out of your camera’s view and features, please take the following placement guidelines into consideration. Height: Place the camera 1.5 - 2 meters (4 to 6.5 feet) from the ground. Person Detection: Person Detection works best when the subject is between 2 to 5 meters (6.5 - 16 feet) away from the camera. 1.5 - 2 m (4 - 6.5 ft) 2 m (6.5 ft) Ideal Viewing Distance: 2 - 5 m (6.
Section 2 - Installation Mounting the Camera 1 / 2 / 3 / Turn the mounting bracket counterclockwise to release it from the device. The device can be mounted on a wall or on the ceiling. Align the mounting bracket so that the arrow is pointing up. Use a pencil to make marks in the two holes. Use a 6 mm drill bit to drill two 26 mm deep holes over the pencil marks.
Section 2 - Installation 4 / 5 / 6 / Hammer in the plastic anchors to support the screws. Align the mounting bracket’s holes over the plastic anchors. Drive the screws into the anchors to secure the mounting bracket. Align the camera using the grey dots, then twist the camera clockwise onto the mounting bracket until it securely locks into place.
Section 2 - Installation 7 / Adjust your camera via its tilt and rotation options until you’re satisfied with the viewpoint.
Section 3 - mydlink Using the mydlink App Controlling Your Device Note: Screenshots are representative only. The mydlink app is constantly being updated and so may appear different. After setting up your DCS-8300LHV2 Full HD Wi-Fi Camera with a mydlink account in the mydlink app, you will be able to remotely access your camera through the app. After signing into your mydlink account, you will see a screen similar to the one on the right.
Section 3 - mydlink Device Settings To access the Device Settings page: 1. Tap . 2. Tap Device Settings. 3. Tap the device you want to access the settings for. The device page contains several options for you to configure your camera.
Section 3 - mydlink 1 Device Name Tap to change the device’s name. 2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed. 3 Motion and Person Detection 4 Storage Tap to set the Motion and Person Detection area and sensitivity settings. 1 Tap to change the video clips storage location from the microSD card to the cloud. You can also subscribe to mydlink Cloud from here and view your current subscription plan.
Section 4 - Troubleshooting Troubleshooting What do I do if my device is not working properly? Reset the device and reinstall it. To reset your device, use a paper clip to press and hold the recessed Reset button until the LED turns solid red.
Appendix A - Technical Specifications Technical Specifications General Video Compression H.264 Max. Resolution 2 Megapixel (Full HD) Max. Frame 1080p (1920 x 1080) at up to 30 fps Image Sensor 1/3” Progressive CMOS sensor Day & Night - IR LED 5 m (16 ft) Focal Length 3.18 mm Aperture F2.2 Angle of View (H) 100° (V) 52° (D) 120° Mechanical PTZ No Audio Built-in microphone and speaker Audio Codec MPEG-2 AAC LC Functionality Wireless IEEE Standard 802.
Appendix A - Technical Specifications Physical Power Input 100 to 240 V AC, 50/60 Hz Power Output 5 V DC 1.2 A Max. Power Consumption Maximum 5 W ± 5% Cable Length 1.5 m Indoor / Outdoor Indoor Operating Temperature 0 to 40 °C (32 to 104 °F) Storage Temperature -20 to 70˚ C (-4 to 158 °F) Operating Humidity Max. 90% non-condensing Storage Humidity Max. 90% non-condensing Weight 80 g (2.8 oz) Dimensions 62 x 65 x 112 mm (2.4 x 2.6 x 4.
Appendix B - Regulatory Information Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix B - Regulatory Information Innovation, Science and Economic Development Canada (ISED) Statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Appendix B - Regulatory Information European Community Declaration of Conformity: Česky [Czech] Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com. Dansk [Danish] D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU.
Appendix B - Regulatory Information Latviski [Latvian] Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com. Lietuvių [Lithuanian] Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą 2014/53/ES.
Appendix B - Regulatory Information Svenska[Swedish] D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB.
Appendix B - Regulatory Information NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY): • • This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries.
Appendix B - Regulatory Information AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) • • Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d'interférences.
Appendix B - Regulatory Information AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS) • • Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
Appendix B - Regulatory Information SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. • Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. • Do not attempt to service the product and never disassemble the product.
Appendix B - Regulatory Information CONSIGNES DE SÉCURITÉ Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails. • L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.
Appendix B - Regulatory Information ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto. • L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto.
Appendix B - Regulatory Information Disposing of and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix B - Regulatory Information FRANÇAIS FR Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement.
Appendix B - Regulatory Information ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix B - Regulatory Information POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix B - Regulatory Information MAGYAR HU Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix B - Regulatory Information DANSK DK Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix B - Regulatory Information SVENSKA SE Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
