Wi-Fi Baby Camera DCS-825L Quick Installation Guide
English Before you get started... • Please save this guide for future reference. • Please read these instructions before using your product. • Do not cover the ventilation holes. • Do not cover this product with a blanket. • Do not allow children to play with this product. • Do not allow this product to get wet. Only use a dry cloth to clean it. • Do not place this product near water or other liquids, such as near a sink, shower, or bathtub. • Do not attempt to open or disassemble this product.
English 2 Plug in your camera, and wait until the Power LED turns green. You can use the included power adapter, or you can use a portable USB battery(not included) that can supply 5 V / 2 A of power. 3 Download and run the free mydlink Baby Camera Monitor app to set up your camera. Search for the free mydlink Baby Camera Monitor on the App Store or Google Play, then download and run the app. The app will guide you step by step through the setup process.
English Your Wi-Fi Baby Camera Front View Temperature Sensor Temperature Indicator Lullaby/Volume/ Power Buttons Night Vision Lights (IR) Focus Ring Camera Lens Light Sensor Microphone Camera Base Front Accent Ring Base Accent Ring Back View Bottom View Speaker Reset Button Power LED MicroSD Card Slot DCS-825L MicroUSB Power Port Cloud LED Mounting Point 3
English Mounting your camera (optional) • Place the mounting base where you want to position the camera and use a pencil to mark the holes. • Use a 6mm drill bit to drill both holes at least 30mm deep. • Use a mallet to insert the wall anchors into the holes. • Place the mounting base over the holes that are in the wall. • Make sure to align the mounting base holes with the holes in the wall and then use the supplied screws to attach the mounting base to the surface of the wall.
English Troubleshooting The image is out of focus. • You can turn the white focus ring on the front of the camera to adjust the focus. How do I change the accent rings? • Rotate the accent ring counterclockwise, then lift it off. Put the new accent ring on, then rotate it clockwise until it clicks into place. How do I select a different lullaby? • You can change the lullaby used in the mydlink Baby Camera Monitor app. There’s a white haze on my camera video when I use night vision mode.
English TECHNICAL SUPPORT You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: +91-22-27626600 Toll Free 1800-22-8998 Web: www.dlink.co.in E-Mail: helpdesk@dlink.co.in Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.
Your Camera's Information Your Camera's Wi-Fi Details: Your Camera's Password Technical Support For further assistance, visit us on the web: www.dlink.com Ver. 1.00(DI) 2013/09/23 6DCS825LQ.
