User Guide

When asked to scan the QR code, use the code found on the

bottom of the camera. Repeat steps 1 through 4 to set up

additional cameras.

Note: The QR and pin code on the bottom of the device is

unique to the camera itself. Please be sure to scan each camera

individually during set up.

DCS-8000LH

PIN Code: XXXXXX

mydlink No.: XXXXXXX

MAC ID: XXXXXXXXXXXX

H/W Ver.:A1

F/W Ver.:XXX

Endpoint: DCS-8000LH-XXXX

Plug the included USB Power Adapter into the back of the

camera. Wait until the LED at the front changes from red to

blinking orange.

To download and install the mydlink app on your mobile

device, scan the QR code above for your Android or iOS device.

New users: Tap Sign Up to register for a mydlink account,

then tap Add a Device to install your camera.

Existing users: Sign In using your mydlink account and tap

the icon at the top left, then tap Add a Device to start the

setup wizard.

PAGE 1
2 3 4 DCS-8000LH PIN Code: XXXXXX mydlink No.: XXXXXXX MAC ID: XXXXXXXXXXXX Endpoint: DCS-8000LH-XXXX OR Plug the included USB Power Adapter into the back of the camera. Wait until the LED at the front changes from red to blinking orange. To download and install the mydlink app on your mobile device, scan the QR code above for your Android or iOS device. New users: Tap Sign Up to register for a mydlink account, then tap Add a Device to install your camera.
PAGE 2
? Minimum Requirements Frequently Asked Questions To install this product, you will need: • 802.11n/g wireless router • Internet connection • A mobile device with Bluetooth 4.0 is required for setup. • The latest version of the mydlink app from your operating system’s application store. • The mydlink app is available for iPhone, iPad and Android™ devices. Please refer to the mobile app's store page to check whether your device is compatible.