DCS-8000LH Mini HD Wi-Fi Camera User Manual 11/14/2017 Hardware: A1 Manual Version: 1.
Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revision Revision Date 1.00 11/14/2017 Description Initial release A1 with firmware version 1.
Table of Contents Table of Contents Product Overview............................................................... 4 Package Contents.......................................................................... 4 System Requirements.................................................................. 5 Introduction.................................................................................... 6 Features.............................................................................................
Section 1 - Product Overview Product Overview Package Contents DCS-8000LH Mini HD Wi-Fi Camera Micro-USB Power Adapter Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product.
Section 1 - Product Overview System Requirements Network Requirements mydlink App Requirements D-Link DCS-8000LH User Manual • 802.
Section 1 - Product Overview Introduction The DCS-8000LH Mini HD Wi-Fi Camera boasts a 120° lens that easily captures your entire room in high-resolution 720p. The built-in night vision, motion and sound detection, and handy mobile app empower you with knowing exactly what is happening anywhere, anytime. Features Wide Angle Lens The DCS-8000LH provides large area coverage with a wide angle lens, eliminating the need for multiple cameras to cover a single room.
Section 1 - Product Overview Hardware Overview Front View Back View 1 2 3 4 5 6 7 1 Infrared LEDs Illuminate the camera’s field of view in low light environments. 2 Microphone Records audio from the surrounding area. 3 720p Camera Lens 4 Light Sensor The IR-Cut Removable sensor monitors lighting conditions and switches between color and infrared accordingly. 5 Status LED Red: The camera is not connected to the network. Flashing Orange: The camera is waiting for a connection.
Section 2 - Installation Installation Wireless Installation Considerations The DCS-8000LH lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Section 2 - Installation Mobile App Setup You can configure your DCS-8000LH through the mydlink Lite mobile app. On your mobile device, download the app by searching for mydlink Lite in the App Store or Google Play. Note: The app’s user interface may be different depending on your mobile device. Launch the mydlink Lite app and go to the next section for more details on how to set up your DCS-8000LH. Note: Be sure to connect to your wireless network using the 2.4 GHz band.
Section 2 - Installation To install your DCS-8000LH, follow the instructions below: Step 1: New users: Tap New users, sign up here to create an account. Existing users: Sign in to your mydlink account. Step 2: Tap Add a New Camera on the next screen. Step 3: When asked to scan the QR code, tap Yes to use the code found on the bottom of the DCS-8000LH.
Section 2 - Installation Step 4: Using the included Micro-USB adapter, connect the DCS-8000LH to a power outlet then tap Next. Step 5: Wait until the LED on your DCS-8000LH flashes orange, then tap Ready. Step 6: Exit the app to enable bluetooth on your mobile device then return to the app and tap Next.
Section 2 - Installation Step 7: The DCS-8000LH will scan for your wireless network. When it appears in the list, select your network and tap Next. Step 8: Enter the Wi-Fi password for your wireless network and tap Done. Step 9: Once your wireless settings have been verified, you will be asked to enter a password to protect your camera.
Section 2 - Installation Step 10: The time zone for your DCS-8000LH will be automatically set to that of your mobile device. Tap OK. Step 11: If you are logged in with a mydlink account, you will be asked to add this device under that account. If you do not have a mydlink account, you can choose to register for one or to skip this step. Step 12: Your DCS-8000LH should now be connected to your network and you have completed setup. Tap Done to finish.
Section 2 - Installation mydlink After registering your camera with a mydlink account, you will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following: For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest instruction guide for your camera’s mydlink features.
Section 3 - Using the Mobile App Using the Mobile App mydlink Lite Once you have installed your camera through the mydlink Lite mobile app. You can automate recording and use features such as motion detection and push notifications when events are triggered. You can monitor your camera using the mydlink Lite app either from your local network (same as the camera’s) or remotely from anywhere with an Internet connection.
Section 3 - Using the Mobile App If you tap on your device name, you will be taken to the Live View page, where you can view a live stream from your camera. There are also short how-to guides built into the app that you can access at any time if you need help. Step 1: Tap the icon to bring up the menu. Step 2: Tap How to Use to see a list of topics you need help on. Step 3: The list of topics include: • Easy Setup: For details on how to set up your new camera.
Section 3 - Using the Mobile App Live View 8 1 Live View • Rotate your device to landscape orientation for full screen viewing. • Pinch to zoom. 1 2 Sound On/Off Button 3 Snapshot 4 Viewing Resolution 5 Manual Record Button Tap this button to manually start recording video. The clip will be saved to your mobile device. 6 View Mode Button Tap this button to toggle between Day, Night (IR LED on), or Auto modes.
Section 3 - Using the Mobile App Camera Options The Camera Options page lets you access the camera’s settings. To configure settings, simply tap the icon from the Live View page to access the Main Features menu. Live View Tap this icon to return to the live monitoring page. Settings Tap this icon to access the Device Settings page, where you can configure motion and sound detection and other camera settings. Push Notification Tap this button to access the Push Notification page.
Section 3 - Using the Mobile App Device Settings The Device Settings page lets you configure your camera’s system settings as well as automate event triggers. To configure settings, simply tap the icon to access the camera options menu, then tap Settings to configure motion and sound detection and other camera settings. Motion Detection This shows if Motion Detection is on or off. Tap this to go to the detailed settings page for customizing your motion detection requirements.
Section 3 - Using the Mobile App Motion Detection On this page you can tap Motion Detection to enable or disable it. To customize your motion detection, tap Active Area to enter the configuration screen. You can tap on the image to activate red squares for areas you wish to detect motion in. Tap Clear All to remove all motion detection areas. Adjust the Sensitivity percentage until your desired motion detection results are achieved. Higher sensitivity will trigger smaller movements.
Section 3 - Using the Mobile App Sound Detection On this page you can tap Sound Detection to enable or disable it. To customize your sound detection, tap Detection Level to enter the configuration screen. icon to change the threshold of the audio level you wish to register You can tap and hold the detection on. You can select from 50 to 90 decibels for the detection level limit. The red bars indicate triggering and the blue bars are under the threshold.
Section 3 - Using the Mobile App Wi-Fi Setting If you need to change the network settings for your device, go to Wi-Fi Setting to scan for or manually add a Wi-Fi network. Tap the icon to perform a rescan, or select from one of the SSIDs below. If necessary, you can tap Add Wi-Fi network to manually add an SSID. After entering the Wi-Fi network name (SSID) of your preferred network, you need to select the type of encryption being used for the network you’re connecting to.
Section 3 - Using the Mobile App Time Zone On this page you can change the time zone of your device by simply scrolling to it and tapping it. Then tap Apply for it to take effect.
Section 3 - Using the Mobile App Push Notification On this page you can enable or disable notifications to be pushed to your mobile device in the event that motion or sound has been detected by the camera. To enable push notifications: Step 1: Tap the Enable Push Notification On/Off button. Step 2: If you are using Android, check the Sound box to play a sound if a notification is sent to your device. Make sure your notification volume is set on your device. iOS devices do not have this option.
Section 3 - Using the Mobile App Firmware Version On this page you can view the currently installed firmware version of your device.
Section 3 - Using the Mobile App Remove Device On this page you can remove your device from your mydlink account and reset the firmware to factory default settings. Simply tap Remove to reset your device to factory default settings and remove it from your mydlink account.
Section 4 - Troubleshooting Troubleshooting 1. What can I do if I forget the password for my camera? If you forget your password, you will need to perform a factory reset of your camera. This process will change all your settings back to the factory defaults. It is therefore recommended that you make a record of the password for future reference. To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your camera is plugged in. 2.
Section 4 - Troubleshooting type of notification. 1. How can I access my DCS-8000LH remotely through the Internet? In order to use your DCS-8000LH remotely through the Internet using the mydlink Lite app, you must register your camera with a mydlink account. You can do this using the free mydlink Lite app. Please go to Mobile App Setup on page 9 for more information. 2. How do I update the firmware of my camera? You can update your camera’s firmware by using the mydlink Lite app.
Appendix A - Technical Specifications Technical Specifications Camera Hardware Profile Image Features Video Compression Video Resolution Audio Support • • • • • • • 1/4” progressive CMOS sensor Minimum illumination: 0 lux with IR LEDs on Minimum object distance: 50 cm Lens focal length: 2.45 mm ± 3% Aperture: F2.
Appendix A - Technical Specifications Physical Environment Weight Power Adapter Power Consumption Temperature Humidity Certifications • For indoor use only • 57.7 grams (2.04 ounces) ± 5% • Input: 100 to 240 V AC, 50/60 Hz • Output: 5 V DC 1 A (Micro-USB) • Maximum: 4 watts ± 5% • Operating: 32 to 104 °F (0 to 40 °C) • Storage: -4 to 158 °F (-20 to 70 °C) • Operating: 20% to 80% non-condensing • CE • CE LVD • ICES • FCC 3.62 inches Dimensions Diagram 1.
Appendix B - Regulatory Statements Regulatory Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Appendix B - Regulatory Statements Innovation, Science and Economic Development Canada (ISED) Statement: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Innovation, Science and Economic Development Canada (ISED) Statement: This device complies with ISED licence-exempt RSS standard(s).
Appendix B - Regulatory Statements NCC 警語： 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使 用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 電磁波曝露量MPE標準值(MPE) 1 mW/cm2，送測產品實值為 0 mW/cm2 2.4 G Frequency Band(s) Frequenzband Fréquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) Max. Output Power (EIRP) Max. Output Power Consommation d’énergie max.
Appendix B - Regulatory Statements European Community Declaration of Conformity: Česky [Czech] Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com. Dansk [Danish] D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU.
Appendix B - Regulatory Statements Latviski [Latvian] Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com. Lietuvių [Lithuanian] Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą 2014/53/ES.
Appendix B - Regulatory Statements Svenska[Swedish] D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB.
Appendix B - Regulatory Statements NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY): • • This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries.
Appendix B - Regulatory Statements AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) • • Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d'interférences.
Appendix B - Regulatory Statements AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS) • • Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
Appendix B - Regulatory Statements SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. • Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. • Do not attempt to service the product and never disassemble the product.
Appendix B - Regulatory Statements CONSIGNES DE SÉCURITÉ Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails. • L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.
Appendix B - Regulatory Statements ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto. • L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto.
Appendix B - Regulatory Statements Disposing and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix B - Regulatory Statements FRANÇAIS FR Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la santé de l’homme.
Appendix B - Regulatory Statements ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix B - Regulatory Statements POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix B - Regulatory Statements MAGYAR HU Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix B - Regulatory Statements DANSK DK Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix B - Regulatory Statements SVENSKA SE Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
