Quick Installation Guide Full HD Day & Night Outdoor Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera.
Quick Install Guide This installation guide provides basic instructions for installing the Network Camera on your network. For additional information about how to use the camera, please see the User’s Manual which is available on the CD included in this package or from the D-Link support website. Installation Steps 1. 2. 3. 4. 5. Verify the package contents against the list below. Hardware Overview SD Card Installation Hardware Installation Configuration with Wizard 1.
2. Hardware Overview Ethernet Jack RJ-45 connector for Ethernet which can also be used to power the camera using Power over Ethernet (PoE) Power Connector Connects to 12V DC power Audio Out Connects to speakers Audio In Connects to a microphone DI/DO Wiring, 12V DC output I/O connectors for external devices 24 V Power Connector Connects to 24 V AC power Reset Button Resets camera to factory default settings BNC Analog video output 3.
. Mounting Instructions Mounting Installation Please refer to the User Manual for detailed instructions regarding installation and mounting of the camera using a mounting bracket. 4 Figure 2.1 Figure 2.2 Figure 2.3 Figure 2.
General Connection Using 12V DC Power Adapter 1. Connect the network camera to your network via an Ethernet cable. 2. Connect the supplied power cable from the camera to a power outlet. General Connection Using 24V AC Power Wiring 1. Connect the network camera to your network via an Ethernet cable. 2. Connect the supplied power cable from the camera to a power source such as your building's emergency power.
5. Configuration with Wizard Insert the DCS-7413 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. Click Setup Wizard to begin the installation. After clicking Setup Wizard, the following window will open. Click Next to continue. Click Yes to accept the License Agreement.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the network camera's default static IP 192.168.0.20 will be displayed. Click the Wizard button to continue. Enter the Admin ID and password.
Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the camera. Select admin as the User Name and enter your password (by default the password is blank). Click OK to continue. This section shows your camera’s live video.
Notes D-Link DCS-7413 Quick Install Guide 9
Notes 10 D-Link DCS-7413 Quick Install Guide
Notes D-Link DCS-7413 Quick Install Guide 11
Technical Support D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Telephone (877) 354-6555 World Wide Web http://support.dlink.com Canada Telephone (877) 354-6560 World Wide Web http://support.dlink.com Version 1.0 July 3, 2012 RMN0100722 Copyright ©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved.
