Version 3.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 2.0 November 25, 2011 DCS-7110 Revision A2 with firmware version 1.10 2.01 March 5, 2012 DCS-7110 Revision A2 with firmware version 1.20 2.10 July 16, 2012 DCS-7110 Revision A3 with firmware version 1.20 3.
Table of Contents Product Overview.......................................................................5 Package Contents.......................................................................... 5 System Requirements.................................................................. 6 Introduction.................................................................................... 7 Features............................................................................................. 8 Hardware Overview.
Time and Date...................................................................70 Maintenance......................................................................71 Parameter List...................................................................73 Logs......................................................................................74 Appendix A - Technical Specifications................................. 75 Technical Specifications............................................................
Product Overview Package Contents HD IR OUTDOOR Ver. 1.00(WW) DCS-7110 ©20 10 DLi Network Camera Power Adapter Mounting Bracket Screw nk Corp or ation/D-Link Systems, Inc. All Rights rved Rese . User Manual and Software on CD-ROM Quick Install Guide CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller.
Product Overview System Requirements Operating System: Microsoft Windows®, 2000, XP, Vista, 7 Memory : At least 256MB of memory (512MB recommended) Web Browser: Internet Explorer 6.x or higher VGA card resolution: SVGA or XGA (1024x768 or above) CPU: 1.7GHz or above (2.
Product Overview Introduction D-Link DCS-7110 is an all-in-one, outdoor network camera equipped with industry-leading Full HD megapixel resolution and H.264 compression. The DCS-7110 connects to a network to provide high-quality live video over the Internet. This camera is capable of capturing video in both dark and light environments thanks to its built-in IR LEDs and IR-cut removable (ICR) filter.
Product Overview Features Flexible Connectivity The DCS-7110 includes input and output ports for connectivity to external devices such as IR sensors, switches, and alarm relays. The DCS7110 also incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling. High-Quality Video at HD Resolution The DCS-7110 provides real-time video feeds at up to 15fps with Full HD resolution and 30 fps with HD resolution. H.
Product Overview Hardware Overview Front Panel Sunshield Adjustable sunshield protects the camera sensor from direct sunlight LED Power and network indicator D-Link DCS-7110 User Manual Infrared LEDs IR LEDs Illuminate the camera's field of view IR-Cut Removable (ICR) Sensor IR-Cut Removable sensor judges lighting conditions and switches from day mode to night mode accordingly 9
Product Overview Cable Connectors DC Power Connects to the 12 V DC power adapter to power the camera AC 24 V AC power wiring can be connected to the AC connectors to power the camera.
Product Overview Rear panel Rest Button Removing the weatherproof cover, use a paperclip or similar tool to press and hold the recessed button for 10 seconds to reset the camera back to the factory default settings D-Link DCS-7110 User Manual 11
Installation Hardware Installation Mounting the Camera Step1: Using the two screws provided attach camera shoe to the underside of the camera. Step2: Using the bolt provided attach camera shoe to the mounting bracket and adjust the vertical orientation of the camera. Step3: Using the Allen Wrench provided, loosen the bolts and adjust the vertical / horizontal orientation of the camera to desired field of view. Firmly tighten the adjustment bolts and lock it into the place.
Installation Deploying the Camera Step1: Locate an area on the wall which is capable of supporting the weight of the camera. Step2: Use a drill bit to make holes. Insert wall anchors and affix the mounting bracket using the screws provided. Step3: The camera cables can be installed through a separate large hole drilled in the wall, or using an external cable conduit.
Installation Cable Connections Basic Connection (without PoE) 1. Connect the camera to your switch or router via Ethernet cable. 2. Connect the power cable from the camera to the supplied power adapter. 3. Connect the supplied power adapter to a power outlet. Connection Using a PoE Switch If using a PoE switch or router, connect the network camera via Ethernet cable. PoE will transmit both power and data over a single cable. Note: Once power has been established, the LED will turn red.
Installation Note: To prevent the camera's wire connectors from being damaged by water or other elements: 1. When connecting the camera, the unsheathed part of the wire connectors must either be sealed or enclosed in a junction box. 2. The unsheathed part of the wire connectors should be positioned at a downward-facing angle when they extend out of the rear of the camera, not upward. The unsheathed part of the wire connectors must either be sealed or enclosed in a junction box.
Installation Software Installation Setup Wizard Insert the DCS-7110 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. Click Setup Wizard to begin the installation. After clicking Setup Wizard, the window on the right will open. Click Next to continue.
Installation Click Yes to accept the License Agreement. To start the installation process, click Next. Note: The installation may take several minutes to finish.
Installation Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
Installation The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the network camera's default static IP address 192.168.0.20 will be displayed. Click the Wizard button to continue. Enter the Admin ID and password. When logging in for the first time, the default Admin ID is admin with the password left blank.
Installation Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next, to proceed to the next page. Take a moment to confirm your settings and click Restart.
Installation Web-based Configuration Utility This section explains how to configure your new D-Link Network Camera using the Web-based Configuration Utility. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the camera.
Installation Enter admin as the default username and leave the password blank. Click OK to continue. This section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the CD-ROM or the D-Link website.
Installation D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. Insert the CD-ROM into the CD-ROM drive. Click "Install D-ViewCam Software" from menu, and select "D-ViewCam" to install the VMS software. Follow the Installation Wizard to install D-ViewCam.
Installation Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual.
Configuration Live Video When you connect to the camera's web interface you will see the following page. This is the Live Video page which will allow you to view the camera's video feed and control basic camera functions using the icons on the screen. Please refer to the tables on the following pages for detailed information about the icons on this screen.
Configuration D-Link Logo Click this logo to visit the D-Link website. The logos and website can be customized to fit your needs. For more information, please refer to User Customization on page 66. Securicam Logo Client Settings Language Setup Setup the stream transmission mode and saving options on the local computer. Select this option to adjust the language settings. Click on the setup icon on the main page to enter the camera setting pages.
Configuration Home: Move the camera to the preset home position. ePT Direction Direction: Control the camera’s pan or tilt directions (up/down/left/ right). Digital PTZ Control Panel Zoom in/out to magnify or shrink the digital image. Zoom in: Magnify image Zoom Zoom out: Diminish image Patrol: Patrol executes a pre-defined sequence of pan, tilt, zoom, and focus features Before selecting this, users must define at least two preset points.
Configuration Snapshot Recording Recording Folder Digital Zoom Full Screen Zoom ratio Help Click this button to capture and save still images. The captured images will be displayed in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP (*.bmp) format. Click this button to record video clips to your computer. When you exit the web browser, video recording stops accordingly. Specify a storage destination for the recorded video files.
Configuration Client Setup Clicking the Client Settings button will bring you to the following screen which allows you to configure the basic protocol options for you camera. H.264/MPEG4 Protocol Options For additional information about streaming options please see page 41. UDP Unicast: Stream to a single computer. UDP Multicast: Stream to multiple computers using multicast streaming. TCP: Provides higher quality video streaming than UDP and provides error correction.
Configuration Setup The DCS-7110 includes basic and advanced setup screens. Both screens include a tree view with multiple setup options. This manual includes detailed explanations for all advanced setup screens. Basic Setup Click the setup button to enter the setup screen. Click on the basic button to enter the setup screen. Please click the [+] next to each folder to view the options.
Configuration Advanced Setup Click the setup button to enter the setup screen. Click on the advanced button to enter the setup screen. Please click the [+] next to each folder to view the options.
Configuration System Overview The system overview page contains a summary of the camera's current settings. For more information about adjusting these settings, please consult the subsequent instructions found in this manual.
Configuration Video Video Settings This page allows you to set up 4 video streams to be displayed on a computer, mobile device, or storage system. Each stream has independent options for proper compression type, frame size, frame rate to optimize the bandwidth utilization and video quality. Video Options Viewing Window: The camera supports multiple streams with frame size ranging from 176 x 144 to 1920x1080. Click Viewing Window to open the viewing region setting page.
Configuration Once finished with the setting in the Viewing Window, click Save to enable the settings and click Close to exit the window. The selected Output Frame Size will immediately be applied to the Frame size of video stream. You can then go back to the Live Video to test the new settings. Sensor Setting: Click Sensor Setting to open the Sensor Setting page. On this page, you can set the maximum exposure time, exposure level, and AGC (Auto Gain Control) setting.
Configuration Video Quality Setting for Stream 1~4 Compression Type: The compression level affects the amount of bandwidth and storage required. Lower compression uses more bandwidth and storage but delivers better image quality. Of the three options, H.264 consumes much less network bandwidth compared to MPEG4 and JPEG. Frame Size: Select proper frame size for different viewing devices, bigger frame size requires more bandwidth and storage usage.
Configuration Image Settings This page allows you to tune the white balance, brightness, saturation, contrast, and sharpness settings for the video. Color: Select either a Color or B/W (black and white, monochrome) video display. Power Line Frequency: Select either 50 or 60 Hz depending on your region. Video Orientation: Flip will vertically rotate the video. Mirror will horizontally rotate the video. You may select both options if camera is being installed upside down.
Configuration Brightness: Adjust the image brightness level, which ranges from -5 to +5 Saturation: Adjust the image saturation level, which ranges from -5 to +5 Contrast: Adjust the image contrast level, which ranges from -5 to +5 Sharpness: Adjust the image sharpness level, which ranges from -3 to +3 Overlay Title and Time Stamp on Video: Select this option to place the video title and time on the video streams. (When the frame size is set to 176 x 144 only the time will be stamped on the video streams.
Configuration Day and Night Settings Switch to B/W in Night Mode: Select to automatically enable the camera to switch to B/W night mode. IR Cut Filter: The IR-Cut Removable (ICR) filter mechanically switches between two different sensor filters. It provides the best light conditions both during the day and night. The following options are: • Auto Mode: The camera automatically switches between day and night mode by judging the level of ambient light.
Configuration Network IP Settings IPv4 LAN: Select this option when the camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting for the Network Type is LAN. Remember to click Save when you complete the Network setting. • Get IP address automatically (DHCP): Select this connection if you have a DHCP server running on your network and would like a dynamic IP address to be assigned to the camera automatically.
Configuration computer name and IP address. • Enable UPnP Presentation: Select this option to enable UPnP presentation for the camera so that whenever a camera is presented to the LAN, shortcuts of connected cameras will be listed in My Network Places. You can click the shortcut to link to the web browser. Currently, UPnP is supported by Windows XP or later. Note that to utilize this feature, please make sure the UPnP component is installed on your computer.
Configuration 5. The camera will reboot. 6. Disconnect the power to the camera. Remove it from the LAN environment. IPv6 Enable IPv6: Select this option and click Save to enable IPv6 setting. Please note that this only works if your network environment and hardware equipment support IPv6. The browser should be Microsoft ® Internet Explorer 6.5, Mozilla Firefox 3.0 or above.
Configuration Port and Access Name Settings HTTPS By default, the HTTPS port is set to 443. It can also be assigned to another port number between 1025 and 65535. FTP The FTP server allows the user to save recorded video clips. By default, the FTP port is set to 21. It also can be assigned to another port number between 1025 and 65535. HTTP By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. They can also be assigned to another port number between 1025 and 65535.
Configuration basic, and digest. If basic authentication is selected, the password is sent in plain text format, but there can be potential risks of it being intercepted. If digest authentication is selected, user credentials are encrypted using MD5 algorithm, thus providing better protection against unauthorized access. Access Name for Stream 1 ~ 5: This camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source.
Configuration changes, the multicast RTCP port will change accordingly. Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a packet can be forwarded. Click the items to display the detailed configuration information. Select the Always multicast option to enable multicast for stream 1 ~ 4.
Configuration Dynamic DNS This section explains how to configure the dynamic domain name service for the camera. DDNS is a service that allows your camera, especially when assigned with a dynamic IP address, to have a fixed host and domain name. Enable DDNS: Select this option to enable the DDNS setting. Server Name: Select a DDNS server name from the provider drop-down list. With a Dynamic DNS account, the camera automatically updates your IP address. To enable DDNS, enter your host information.
Configuration HTTPS This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS Select this item to enable HTTPS communication, then select a connection option: "HTTP & HTTPS" or "HTTPS only". Note that you have to create and install a certificate first in the second column before clicking the Save button.
Configuration Select this option to create a certificate from a certificate authority. 1. Click Create to open the Create Certificate page, then click Save to generate the certificate. 2. If you see the information bar, click OK and click on the Information bar at the top of the page to allow pop-up. 3. The pop-up window shows an example of a certificate request. 4. Look for a trusted certificate authority that issues digital certificates. Enroll the camera.
Configuration Access List This section explains how to control access permissions by verifying the connecting client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 ~ stream 5). The default value is 10. If you modify the value and click Save, all current connections will be disconnected and automatically attempt to re-link (I.E. Explorer or Quick Time Player).
Configuration • Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that the selected connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the denied list, please select Enable access list filtering and click Save in the first column.
Configuration Advanced Settings SNMP configuration This section explains how to use the SNMP on the network camera. The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices. It helps network administrators to remotely manage network devices and find, solve network problems with ease. The SNMP consists of the following three key components: 1.
Configuration based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x setting. The 802.1x standard is designed to enhance the security of local area networks, which provides authentication to network devices (clients) attached to a network port (wired or wireless). If all certificates between client and server are verified, a point-to-point connection will be enabled.
Configuration provide higher reliability and stability on the network. Requirements for QoS: To utilize QoS in a network environment, the following requirements must be met: • All network switches and routers in the network must include support for QoS. • The network video devices used in the network must be QoS-enabled. CoS IEEE802.1p defines a QoS model at OSI Layer 2 (Data Link Layer), which is called CoS, Class of Service.
Configuration queuing theory, and dropping (discarding the packet) decisions. Routers at each network node classify packets according to their DSCP value and give them a particular forwarding treatment. For example, how much bandwidth should be reserved. Quality of Service refers to a resource reservation control mechanism, which guarantees a certain quality to different services on the network.
Configuration Event Management Motion Detection Motion can be detected by measuring change in speed or vector of an object or objects in the field of view. Enable Motion Detection: Select this option to turn on the motion detection feature. Window Name: Create your own name for the monitored area/ window. It will show at the top of the motion window. Sensitivity: Set the measurable difference between two sequential images that would indicate motion.
Configuration Tamper Detection With tamper detection, the camera is capable of detecting incidents such as redirection, blocking or de-focusing, or even spray paint. To enable tamper detection, follow the steps given below: 1. Select Enable camera tampering detection. 2. Enter the tamper trigger duration (10 sec. ~ 10 min.). The tamper alarm will be triggered only when the tampering factor (the difference between current frame and pre-saved background) exceeds the trigger threshold.
Configuration DI and DO Network camera provides a general I/O terminal block with one digital input and digital output for device control. The I/O connector provides the physical interface for digital input (DI+. GND) and digital output (DO-, +12V) that is used for connecting a diversity of external alarm devices to the camera such as IR-Sensors and alarm relays. Once triggered images will be taken and e-mailed.
Configuration Event Settings This section explains how to configure the camera to respond to particular situations (event). A typical application is that when a motion is detected, the camera sends buffered images to an FTP server or e-mail address as notifications. Sever Settings Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify where the notification messages are sent when a trigger is activated. A total of 5 server settings can be configured.
Configuration • Server port: By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535. • User name: Enter the login name of the FTP account. • Password: Enter the password of the FTP account. • FTP folder name: Enter the folder where the media file will be placed. If the folder name does not exist, the camera will create one on the FTP server. • Passive mode: Most firewalls do not accept new connections initiated from external requests.
Configuration Media name: Enter a name for the media setting. Media Type: There are three choices of media types available: Snapshot, Video Clip, and System log. Select the item to display the detailed configuration options. You can configure either one or all of them. Snapshot: Select to send snapshots when a trigger is activated. Source: Select to take snapshots from stream 1 ~ 4. Send pre-event images: The camera has a buffer area. It temporarily holds data up to a certain limit.
Configuration maximum duration is set to 10 seconds, the camera continues to record for another 4 seconds after a trigger is activated. Maximum file size: Specify the maximum file size allowed. File name prefix: Enter the text that will be appended to the front of the file name. Click Save to enable the settings, then click Close to exit the page. System log: Select to send a system log when a trigger is activated. Click Save to enable the settings, then click Close to exit the page.
Configuration mechanism as a trigger source. To enable this function, you need to configure a Motion Detection Window first. For more information, please refer to Motion Detection for details. Periodically: This option allows the camera to trigger periodically for every other defined minute. Up to 999 minutes are allowed. Digital input: This option allows the camera to use an external digital input device or sensor as a trigger source.
Configuration D-Link DCS-7110 User Manual 62
Configuration Recording Recording Settings Click Add to open the recording setting page. In this page, you can define the recording source, recording schedule, and recording capacity. A total of 2 recording setting can be configured. Recording name: Enter a name for the recording setting Enable this recording: Select this option to enable video recording Priority: Select the relative importance of this recording setting (High, Normal, and Low). Source: Select the recording source (stream 1 ~ 4).
Configuration Enable cyclic recording: If you select this item, when the maximum capacity is reached, the oldest file will be overwritten by the latest one. The reserved amount is reserved for cyclic recording to prevent malfunction. This value must be larger than 15 Mbytes. If you want to enable recording notification, please click Application to set up. Please refer to Trigger > Recording notify for detailed information. When completed, select Enable this recording.
Configuration PTZ Control Digital PTZ You can set a total of 20 preset positions and select preset positions for the camera to patrol. Please follow the steps below to preset a position: 1. Adjust the shooting area to the desired position using the buttons on the right side of the window. 2. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the Setting. The preset positions will be displayed under the Preset Location list on the left-hand side. 3.
Configuration User Customization Live Video Page Configuration Preview: It shows the new layout of Logo/Background/Title based on user setting. Logo Graphic: You can change the logo at the top of your Live Video page. Follow the steps below to upload a new logo: 1. Click Custom and the Browse field will appear. 2. Select a logo from your files. 3. Click Upload to replace the existing logo with a new one. 4. Enter a website link if necessary. 5. Click Save to enable the setting.
Configuration HTML Code Examples This page can generate example HTML code for you, thus you can paste the code into your own web page and get the embedded live video feed. Stream: Select from stream 1 to 4, it will base on the profile of selected stream to generate the code accordingly. Up to 10 clients are supported for live view. Live Stream: • H.264/MPEG4/MJPEG using ActiveX for IE: If target remote user client use Internet Explorer(IE), then the example code can support H.264, MPEG4 and MJPEG stream.
Configuration System User Settings This section explains how to enable password protection and create multiple accounts. Admin Password Setup: The administrator account name is “admin”, which is permanent and cannot be deleted. The default of password is empty. Add user account: Add a new user account. Username: Enter a username for the new account. Password: Enter a password for the new account. Privilege: Select the access rights for the new user. Manage user: Manage the accounts for existing users.
Configuration Device Settings Turn off the LED indicator: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Camera Name: Create a unique name for your camera.
Configuration Time and Date Automatically or manually configure, update, and maintain the internal system clock for your camera. Current Server Time: Displays camera's current time. Time Zone: Select your time zone from the drop-down menu. Enable Daylight Saving: Select this to enable the daylight saving time (DST). During DST, the system clock moves one hour ahead. (Note: To utilize this feature, be sure to first set the time zone of your network camera.
Configuration Maintenance This chapter explains how to restore the camera to factory default, upgrade firmware version, etc. Reboot: This feature allows you to reboot the camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser. The following message will be displayed during the reboot process. If the connection fails after rebooting, manually enter the IP address of the camera in the address field to resume the connection.
Configuration languages: English, Deutsch, Español, Français, Italiano. Upload custom language file: Click Browse… and specify your own custom language file to upload. Export setting backup file: Click to export all parameters for the device and userdefined scripts. Upload setting backup file: Click Browse… to upload a setting backup file. Please note that the model and firmware version of the device should be the same as the setting backup file.
Configuration Parameter List The Parameters List page lists the entire system’s parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page.
Configuration Logs This section explains how to configure the camera to send the system log to the remote server as backup. Remote Log: You can configure the camera to send the system log file to a remote server as a log backup. Before utilizing this feature, it is suggested that the a log-recording tool be first installed on the remote server to receive system log messages from the camera. Be sure to note the IP address of the remote server. Follow the steps below to set up the remote log: 1.
Appendix A - Technical Specifications Technical Specifications Camera Hardware Profile 1/2.7" 2 Megapixel progressive CMOS sensor 4 mm fixed lens , F1.5 15 meter IR illumination distance Minimum Object Distance: 0.4M Built-in Infrared-Cut Removable (ICR) Filter module Angle of view 77.4° (H) 45.
Appendix A - Technical Specifications General Power Input 12 V DC 1.25 A, 24 V AC, 50/60 Hz, 802.3af PoE Max. Power Consumption 6.
