User manual

58D-Link DCS-6915 User Manual
Section 3: Advanced Conguration
Home Function
Use this page to dene the position for the Home button on the PTZ control pad.
Home Setting
Switch on/o: Enable or disable the home setting.
Time
The time here represents the duration of camera idle time previous to running a Preset Point / Cruise
Line / Auto Pan Path / Sequence Line. When the Home function is activated, the Dome Camera will
start to count down when it idles, and then execute the predened action as time expires. The
time period ranges from 1 to 128 minutes; please specify it in theeld.
Type
Please select a Action type (Preset Point / Cruise Line / Auto Pan Path / Sequence Line) and specify the
number of Preset Point / Cruise Line / Auto Pan Path / Sequence Line from the drop-down <Type>
and <Line> lists. Click on the button <Set> to save the Home settings.
Set Home: Position the camera as desired then click this button to set a home position
Reset Home: Set the Home to its default position.
Go Home: Position the camera in the Home position.
Tilt Range
The Network Cameras tilt angle is adjustable from minimum -10° to maximum 190°. Enter the
desired minimum and maximum tilt angle into the corresponding elds respectively. Click on
the Set button to save the tilt angle settings.