User manual
33D-Link DCS-6815/6817/6818 User Manual
Section 3 - Configuration
PTZ Privacy Mask
The privacy mask function will block a dened area of the monitored video from view. The privacy mask will automatically adjust the masked
area as the camera view is adjusted via PTZ functions.
Select this checkbox to enable the privacy mask.
This is the color that will be displayed over the masked area.
Select which mask area you would like to set. You may set up to 16 different masked areas.
Species the horizontal length of the masked area in pixels.
Species the vertical length of the masked area in pixels.
Click this button to set the mask area after specifying the settings.
Click this button to clear the selected mask.
Enable:
Mask Color:
Mask Area Setting:
H Size:
V Size:
Set Mask:
Clear Mask:
Creating a Privacy Mask
1. Select a color for the privacy mask and select the checkbox labeled Enable.
The chosen color will be used for all masks that have been set.
2. Click Submit.
3. Ensure that the camera is zoomed out completely (1X magnication).
4. Use the camera controls to target the center of the image on the area that
you would like to mask.
5. Specify which privacy mask you would like to set (1-16).
6. Set the H size (horizontal) and V size (vertical) then click Set Mask.
7. You may ne tune your settings if needed and click Set Mask again.