User manual

45D-Link DCS-6815/6817/6818 User Manual
Section 3 - Conguration
In a typical application, when motion is detected, the DCS-6815/6817/6818 Network Camera sends images to a FTP server or via e-mail
as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital
input devices. When an event is triggered, a specied action will be performed. You can congure the Network Camera to send snapshots
or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action
shall be performed when a trigger is activated.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
Application