User manual

38D-Link DCS-6815/6817/6818 User Manual
Section 3 - Conguration
PTZ Setup
Auto Pan:
Cruise:
Home:
Digital Zoom:
Freeze:
This page allows you to congure the pan/tilt/zoom settings for the camera. Changes to settings on this page take place immediately.
Auto Pan scans an area horizontally from left to right
or right to left. Up to 4 Auto Pan paths may be dened.
Select the button next to the path that you would like to
set. Use the navigation pad to move the camera view to
the desired start point and click Set Start Point. Move
the camera view to the desired end point and click Set
End Point. You may also specify the pan direction and
speed. Click the Test button to view the path that you
have just dened. Click Stop to end the test.
A Cruise path is a stored route dened through manual
adjustment of pan, tilt, and zoom. Up to 4 Cruise paths
may be dened. Select the button next to the path that you
would like to set. Click Record Start to begin recording a
path. Use the navigation pad or mouse to dene a path
within the live video window. Click Record End when
you are done dening the path. Click the Test button to
view the path that you have just dened. Click Stop to
end the test.
You may turn on the home function and specify the PTZ
behavior.
You may turn digital zoom on or off.
If this option is turned on, the image will freeze at the end
of the predened path and return to the starting point.