User Manual
59D-Link DCS-6315 User Manual
Section 3: Conguration
You can congure the ICR (Removable IR-Cut Filter) and IR (Infrared
Light Control) settings. When the ICR lter is switched on, it
blocks infrared light and allows only visible light to pass through.
The ICR lter is disengaged for increased sensitivity in low-light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
O:
On:
Sync with ICR:
Schedule:
Click Automatic if you want the Day/Night mode
to be set automatically. Generally, the camera will
use Day mode and switch to Night mode when it
gets dark.
Click Day mode to enable the IR Cut Filter.
Click Night mode to disable the IR Cut Filter.
Click Schedule mode to set up the Day/Night
mode using a schedule. Select a starting time for
the camera to enter Day mode, and an ending
time for the camera to change to Night mode.
The camera can enable or disable the IR (infrared)
light control according to the light conditions.
Click on Automatic and make a selection from the
drop-down menu.
Click O so the IR light control is always disabled.
Click On so the IR light control is always enabled.
The IR light will turn on when the ICR sensor is on.
Click Schedule so the IR light control will turn on
or o according to the schedule that you specify.
Click Save Settings.
ICR and IR
DCS-6315