User Manual

47D-Link DCS-6315 User Manual
Section 3: Conguration
Motion Detection
Enable Video Motion to allow your camera to use the motion
detection feature. You may dene a specic area that the camera
will use for monitoring.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion
Area:
Erase Motion
Area:
Check the box to Enable the motion detection
feature of your camera.
Species the measurable dierence between two
sequential images that indicates motion. Enter a
value between zero and 100.
Species the amount of motion in the window
being monitored that is required to initiate an
alert. If this is set to 100%, any motion detected
within the entire window triggers an alert.
Draw the motion detection area by dragging your
mouse within the window (indicated by a red
square).
To erase a motion detection area, simply click on
the red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
Select All: Draws a motion detection area over
the entire screen.
Clear All: Clears any motion detection areas
that have been drawn.
Restore: Restores the previously specied
motion detection areas.
Click Save Settings to save your changes.
DCS-6315