User Manual
35D-Link DCS-6315 User Manual
Section 3: Conguration
This Setup Wizard will guide you through a step-by-step process to
congure your IP camera's motion detection functions.
Click Next to continue.
Motion Detection Setup Wizard
Step 1
This step will allow you to enable or disable motion detection, and
adjust the sensitivity of your camera’s ability to detect movement.
Check the box by Enable Video Motion to enable motion detection.
Click on the radio button to indicate if the camera should capture a
Snapshot or a Video Clip whenever motion is detected.
Refer to "Motion Detection" on page 47 for details about how to
congure motion detection.
Step 2
This step allows you to enable motion detection based on a
customized schedule. Click on Always to make sure your camera
always records whenever motion is detected. Or click on From and
specify the day and hours you want motion detection enabled.
Click on Next to continue.