User Manual

18D-Link DCS-6315 User Manual
Section 2: Assembly and Installation
Pendant Bracket
Bracket Cap
Rubber Seal
Bracket Cap
Mounting Plate
Attaching the Camera to the Pendant Mount
Step 1
The mounting plate that you removed from the lower part
of the camera housing must be attached to the bracket cap,
using the three screws as shown in the diagram.
Step 2
Use the included Alignment Sticker for marking the mounting
holes on the ceiling. Drill the corresponding holes. For more
details, see "Deploying the Camera" on page 13.
Step 3
Place the rubber seal onto the mounting part of the pendant
bracket. Securely mount the rubber seal and pendant bracket
to the ceiling.
Step 4
Attach the bracket cap, by screwing it onto the pendant
bracket.