User manual

51D-Link DCS-6115 User Manual
Section 3: Conguration
You can congure the ICR (Removable IR-Cut Filter) and IR (Infrared Light Control) settings. When the ICR lter is switched on, it blocks infrared light
and allows only visible light to pass through. The ICR lter is disengaged for increased sensitivity in low-light environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
O:
On:
Sync with ICR:
Schedule:
Click Automatic if you want the Day/Night mode to
be set automatically. Generally, the camera will use
Day mode and switch to Night mode when it gets
dark.
Click Day mode to enable the IR Cut Filter.
Click Night mode to disable the IR Cut Filter.
Click Schedule mode to set up the Day/Night
mode using a schedule. Select a starting time for
the camera to enter Day mode, and an ending time
for the camera to change to Night mode.
The camera can enable or disable the IR (infrared)
light control according to the light conditions. Click
on Automatic and make a selection from the drop-
down menu.
Click O so the IR light control is always disabled.
Click On so the IR light control is always enabled.
The IR light will turn on when the ICR sensor is on.
Click Schedule so the IR light control will turn on or
o according to the schedule that you specify.
Click Save Settings.
ICR and IR
DCS-6115