User manual

47D-Link DCS-6115 User Manual
Section 3: Conguration
Add Recording
Recording entry
name:
Enable this
recording:
Priority:
Source:
Time:
Destination:
Total cycling
recording size:
Enter a unique Name for the Recording.
Check the box to Enable the recording function if
you would like to upload the recording to a shared
folder on the network.
Set the Priority for this entry. The entry with a
higher priority value will be executed rst.
Select the Prole to use as the Source of the stream.
Select days of the week the video should be
recorded or click Always if you would like the IP
camera to record video clips continuously. Click
From if you want to specify a time range.
Select the folder where you want the recording le
to be stored.
Enter a storage size between 1MB and 2TB for
video recordings. The new recordings will replace
the oldest when the total recording size exceeds
this value. For example, if each recording le is 6MB,
and the total cyclical recording size is 600MB, then
the camera will record 100 les in the specied
location (folder) and then will delete the oldest le
and create new le for cyclical recording.
You can set up a schedule for recording video to network storage.
DCS-6115