User manual
46D-Link DCS-6115 User Manual
Section 3: Conguration
Add Event
You can create and schedule up to three Events.
Event name:
Enable this event:
Priority:
Delay:
Video Motion
Detection:
Periodic:
Digital Input:
System Boot:
Network Lost:
Time:
Trigger D/O:
Enter a Name for the Event.
Check the box to Enable this event.
Select the Priority level for this Event. The one with
the higher priority will be executed rst.
Enter the Delay (time in seconds) before checking
for the next event. The delay time is used for both
motion detection and digital input triggers.
Click to set the Trigger to Video motion detected
during live video monitoring.
Click to trigger an Event at specied intervals, and
enter a value in minutes.
Click to trigger an Event when DI status changes.
Click to trigger an Event when the system boots up.
Click to trigger an Event whenever the network
connection is lost.
Select days of the week the Event should be
performed or click Always for every day, or click
From and specify a time range.
Check the box to trigger Digital Output for a
specied number of seconds and enter a value.
Click Save Settings.
DCS-6115