User manual
33D-Link DCS-6115 User Manual
Section 3: Conguration
Image Setup
In this section, you may congure the video image settings for your camera. A preview of the image will be shown under Live Video.
Enable Privacy
Mask Setting:
Mirror:
Flip:
Power Line:
White Balance:
Check the box to Enable Privacy Mask Setting.
This allows you to specify up to three rectangular
areas on the image from the camera that you want
hidden. These areas will be blocked or excluded
from recordings and snapshots. You can click and
drag the mouse cursor over the camera image to
draw a mask area.
Right clicking on the camera image brings up the
following menu options:
• Disable All: Disables all mask areas
• Enable All: Enables all mask areas
• Reset All: Clears all mask areas.
Select On to mirror the image horizontally.
Select On to ip the image vertically. When you
enable Flip, you may want to consider enabling
Mirror on as well.
Select the frequency used by your power lines to
avoid interference or distortion.
Use the drop-down menu to change White
Balance settings to help balance colors for
dierent environments. You can choose from Auto,
Outdoor, Indoor, Fluorescent, and Push Hold.
Use the drop-down menu to change the Exposure
DCS-6115