User manual
30D-Link DCS-6115 User Manual
Section 3: Conguration
Enable PPPoE:
User Name/
Password:
HTTP Port:
Access Name
for Stream 1~2:
HTTPS Port:
Authentication:
RTSP Port:
Access Name
for Stream 1~2:
Enable CoS:
Enable QoS:
Click to Enable if your network uses PPPoE.
Enter the User Name and Password for your PPPoE
account. Re-enter your password in the Conrm
Password eld. You can obtain this information from
your ISP.
The default HTTP Port number is 80.
The default name is video#.mjpg, where # is the
number of the stream.
You may use a PC with a secure browser to connect
to the HTTPS Port of the camera. The default port
number is 443.
You may choose to Enable or Disable RTSP (Real
Time Streaming Protocol) digest encryption. Digest
encryption uses MD5 hashes.
The port number that you use for RTSP streaming to
mobile devices, such as mobile phones or PDAs. The
default port number is 554.
You may specify the address of a particular stream. For
instance, live1.sdp can be accessed at rtsp://x.x.x.x/
video1.sdp where the x.x.x.x represents the ip address
of your camera.
Check the box to Enable CoS (Class of Service), for
classication of network trac. This setting implements
a best-eort policy without making any bandwidth
reservations. Select a number to specify trac priority.
Check the box to Enable QoS (Quality of Service), which
establishes a reservation control mechanism for setting
trac priority. This will help improve performance
during busy periods. Select a number to specify trac
priority. If the Network Camera is connected to a router
that itself implements QoS, the router's settings will
override the QoS settings of the camera.