User manual
27D-Link DCS-6115 User Manual
Section 3: Conguration
This Setup Wizard will guide you through a step-by-step process to
congure your IP camera's motion detection functions.
Click Next to continue.
Motion Detection Setup Wizard
Step 1
This step will allow you to enable or disable motion detection, and
adjust the sensitivity of your camera’s ability to detect movement.
Check the box by Enable Video Motion to enable motion detection.
Click on the radio button to indicate if the camera should capture a
Snapshot or a Video Clip whenever motion is detected.
Refer to "Motion Detection" on page 39 for details about how to
congure motion detection.
Step 2
This step allows you to enable motion detection based on a
customized schedule. Click Always to make sure your camera always
records whenever motion is detected, or click From and specify the
day and hours you want motion detection enabled.
Click on Next to continue.