User manual

22D-Link DCS-6115 User Manual
Section 3: Conguration
Digital Input
Indicator
This indicator will change color when a digital input signal is
detected.
Motion Trigger
Indicator
This indicator will change color when a trigger event occurs.
Note: The video motion feature must be enabled.
Recording
Indicator
This indicator will change color when a recording is in progress.
Control Pad
This control pad can be used to electronically Pan, Tilt, and Zoom
(ePTZ) within the camera's predened view area, if one has been
dened.
Auto Pan
This button starts the automatic panning function. The ROI will pan
from back and forth within the FOV (eld of view).
Stop This button stops the camera's ePTZ motion.
Preset Path This button starts the camera's motion along the predened path.
Video Prole 1
Click to select a predened setting (prole). Refer to page 35 for
conguration.
Video Prole 2
Click to select an alternate predened setting (prole). Refer to
page 35 for conguration.
Full Screen Mode
Click to enlarge the video stream to full-screen.
Take a Snapshot Click to record a snapshot of the current image.
Record Video Clip
Click to record a video clip, using predened settings.
Set up Storage
Click to select a folder on your computer to save to.
Listen/Stop
Listening
Click to enable or disable the ability to listen through the built-in
microphone.
Talk/Stop Talking
Click to enable or disable the ability to speak through the built-in
speaker.
Start/Stop Digital
Output
Click to enable or disable the ability to use the built-in digital in/out
port.
DCS-6115