User manual

14D-Link DCS-6115 User Manual
Section 2: Assembly and Installation
Orienting the Camera
The DCS-6115 can be adjusted to maintain the optimum view when
mounted to a wall by following the steps below:
Step 1
Remove the inner side of black cover.
Step 2
Turn the lens module to the left or right until you nd the preferred
position.
Step 3
Tilt the lens module up or down until you nd the preferred position.
Step 4
Hold the camera's base and turn the lens to adjust the IP camera’s
image until the desired orientation is achieved.
Rotate 335°
Tilt 70°
Pan 340°